ISSUE FOCUS FEED & ADDITIVE MAGAZINE March 2026 31 content at this point to make sure the product is losing enough water during the cooling stage. Pellets that are too wet will have a reduced shelf life and are prone to mould. Pellets that are too dry can be less palatable for the animal consuming it. Optimising the moisture in the final feed pellets allows producers to get the highest yield of product for the raw materials that have been consumed. At each of these stages in the process, having points where the moisture is kept at a stable level makes it much simpler to predict the next step and to create an optimal environment for efficient feed production. INDUSTRY EXPERT OPINION ON MOISTURE CONTROL “…if we maintain the correct moisture on a real-time basis throughout the process, we see there is a positive impact on energy consumption as well inside the feed mill. We have seen, generally, there is a 10% reduction in the energy consumption of a pelletizer if a feed mill uses moisture optimization. The benefits are multi-faceted in my view,” said Dr. Prince Nanda, Global Product Manager at Trouw Nutrition1. 1Dr. Prince Nanda (April 2019, updated March 2022). Moisture control in feed mills could result in real savings, Feed Navigator. Your Moisture Measurement Partner Oil Seeds Animal Feed Coff ee Rice Grain Hydro-Probe XT Hoppers, chutes, belt conveyors Hydro-Mix XT-FS Mixers, conveyors, Ducting System Hydro-Mix XT-EX Certified for use in ATEX, IECEx and NEC/CSA Hazardous Locations (Dust) Hydro-Mix HT-EX Mixers, conveyors, Ducting System, High Temperature Non Food-Safe available Non EX available Non EX available enquiries@hydronix.com Contact us for more details hydronix.com Moisture sensor installed in a ribbon mixer
RkJQdWJsaXNoZXIy MTUxNjkxNQ==